DS FE290 Starter
 

Hello
I have a 2010 DS with a FE290 engine, I think the starter is getting weak. Occasionally it won't start and I can rotate the starter/belt a few times then it starts fine. Any recommendations on a site for a new starter? I see a lot of bad reviews on the non OEM starters.
Thanks!

Re: DS FE290 Starter
 

Battery, Cable Connections, Belt. Those are simple and almost always the cause of starting problems. No point buying a new starter right off the bat because Starters on these rarely fail, and when they get old enough it's dirt simple to put new brushes in and keep on using the original for many more years.

Make sure your battery is good first. An old battery won't have the amps anymore to be able to run the starter motor.
Poor battery connections or cables corroded internally will cause slow cranking.
Poor ground connections, starter to frame, engine to frame, frame to battery, can cause slow cranking.
A loose or worn starter belt will slip can cause a faint whirring noise that sometimes people don't hear or don't know what it is. If your belt is old or it's a Non-OEM belt, a new genuine OEM belt can solve a lot of problems.


Lots of people blame the starter and just toss it, but really there's very little to go wrong in the starter, and most of the time a $40 set of brushes and a can of electrical parts cleaner will have an original starter working as good as new again.