EZGO TXT Robin 295cc EH29C
 

Hi!

So I got a rebuild kit for my engine, took my engine out and replaced all the gaskets. I put the engine back in and tested. After a few hours of driving it around I noticed an oil leak. I figured I messed up something. Turns out the oil is leaking from the dipstick guide area and the overflow tube.

I don't know why it would leak from the overflow because it only has a little over 3/4 of oil in it.

Does anyone know how I can change the seal on the dipstick guide? Do I just pull the guide out or do I need to take the engine apart again.... :(

See image..
https://www.dropbox.com/s/uv7csz7hnz..._3624.JPG?dl=0

https://www.dropbox.com/s/uv7csz7hnz..._3624.JPG?dl=0

Re: EZGO TXT Robin 295cc EH29C
 

Pull the tube and if there’s an o ring , replace it. If not put some silicone on it.


Sent from my iPhone using Tapatalk