Buggies Gone Wild Golf Cart Forum
Page 1 of 5 1 23 > Last »
Show 40 post(s) from this thread on one page

Buggies Gone Wild Golf Cart Forum (https://www.buggiesgonewild.com/index.php)
-   Icon (https://www.buggiesgonewild.com/forumdisplay.php?f=103)
-   -   Epic by Icon speed adjust (https://www.buggiesgonewild.com/showthread.php?t=182459)

ezmuzic 02-18-2022 05:39 PM
Epic by Icon speed adjust
 
Hi Everyone, I’m super happy with my 2022 Epic golf cart, it’s gets up to 25mph easily and feels like it’s got more pull speed to go, I know it’s based on an Icon so how could I get the software changed to get some more speed, really only up to 30!

BobInDaytona 02-18-2022 11:34 PM
Re: Epic by Icon speed adjust
 
Quote:
Originally Posted by ezmuzic (Post 1876046)
Hi Everyone, I’m super happy with my 2022 Epic golf cart, it’s gets up to 25mph easily and feels like it’s got more pull speed to go, I know it’s based on an Icon so how could I get the software changed to get some more speed, really only up to 30!
Not based on icon - icon bought the epic company.
Early epics with the same 4 pin molex programming port as icons have a Curtis controller and can be programmed
With the same
Handheld as evolutions and club cars.
The more recent epics have a really
Funky 2 wire
Connector which is unknown to me. I do not have access to one at the moment to get into it, but it still
Might be a Curtis. I do know the two wires go to CAN-H and CAN-L.

PDACPA 02-19-2022 01:26 PM
Re: Epic by Icon speed adjust
 
@exmusic totally agree. 30mph is where the Epic needs to be. Sent mine in to the dealer for a non-working turn signal and asked them to pump the speed to 30mph. Not sure they will, but will report back if they do. I normally travel along a 35mph road and that extra 5mph will help not delay traffic that just does not want to go around me even though I am off on the shoulder/bike lane.

ezmuzic 03-06-2022 01:36 PM
Re: Epic by Icon speed adjust
 
2 Attachment(s)
Quote:
Originally Posted by BobInDaytona (Post 1876099)
Not based on icon - icon bought the epic company.
Early epics with the same 4 pin molex programming port as icons have a Curtis controller and can be programmed
With the same
Handheld as evolutions and club cars.
The more recent epics have a really
Funky 2 wire
Connector which is unknown to me. I do not have access to one at the moment to get into it, but it still
Might be a Curtis. I do know the two wires go to CAN-H and CAN-L.
So I had a root around under the seat and managed to find this lead, I am assuming this is the programming lead but of course be very wrong!

BobInDaytona 03-06-2022 04:29 PM
Re: Epic by Icon speed adjust
 
Quote:
Originally Posted by ezmuzic (Post 1878602)
So I had a root around under the seat and managed to find this lead, I am assuming this is the programming lead but of course be very wrong!
From what I’ve seen on a cart with this connector, the two signal
Wires go to pins 23 and 35 on the controller connector. These are CAN-H and CAN-L. Don’t have a cart to crack this nut yet..
I haven’t been able to identify who
Makes this connector.

KRAZYMATT 03-06-2022 05:40 PM
Re: Epic by Icon speed adjust
 
Quote:
Originally Posted by BobInDaytona (Post 1878625)
From what I’ve seen on a cart with this connector, the two signal
Wires go to pins 23 and 35 on the controller connector. These are CAN-H and CAN-L. Don’t have a cart to crack this nut yet..
I haven’t been able to identify who
Makes this connector.
It looks like a deutsch connector used a ton in automotive industry.

KRAZYMATT 06-02-2022 01:00 AM
Re: Epic by Icon speed adjust
 
I am rounding the bend on this one!

Btenney 06-02-2022 07:46 AM
Re: Epic by Icon speed adjust
 
i have the cables and software on this

KRAZYMATT 06-02-2022 08:39 AM
Re: Epic by Icon speed adjust
 
Quote:
Originally Posted by Btenney (Post 1892446)
i have the cables and software on this
Same just trying wrap up the detail on the cable for the marshell controller. Seems like a lot of guys on here are having trouble locating the programming port connector. Is it buried way down in there or zip tied in with that main harness?

ezmuzic 06-02-2022 08:54 AM
Re: Epic by Icon speed adjust
 
Quote:
Originally Posted by Btenney (Post 1892446)
i have the cables and software on this
Where are you located?

I spoke to the dealer where I purchased it from and they say they don’t have the software, I spoke to Epic though and the engineer said they had the motors running at 35mph with no issues at all!!!


All times are GMT -5. The time now is 04:32 AM.
Page 1 of 5 1 23 > Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.