Ezgo Hotwire
1 Attachment(s)
Have a 06 series cart. Everything is stock. Cart does not have a key switch but has been wired to stay on all the time. Wanting to wire it correctly and add switch back in but have no idea what I need to do. Wires are there, just not hooked to anything. Looked at wiring diagram and looks like blue wire goes to f/r but don’t know exactly where and can’t figure where green wire goes. Picture of what has been done attached.
|
Re: Ezgo Hotwire
1 Attachment(s)
Another pic
|
Re: Ezgo Hotwire
Does green wire go somewhere in the pedal box?
|
Re: Ezgo Hotwire
1 Attachment(s)
See diagram attached. You may not use the Green wire shown. I have seen many carts with this wire unused
|
Re: Ezgo Hotwire
thanks, my wires in the harness (blue and green) are just sitting there unused on both ends. I can't figure out what they did to hotwire it so I can undo it.
|
Re: Ezgo Hotwire
2 Attachment(s)
These are pictures of an unmolested directional switch in a 2000 series cart. I'm the only owner so I know this switch has never had any activation circuit modifications. This cart is 6 years older than yours but it's unlikely EZGO made any changes.
|
Re: Ezgo Hotwire
i really appreciate that. I think it helps a ton. looks like they jumpered the green wire away from where it was supposed to go to the spot where the blue wire was supposed to go.
|
Re: Ezgo Hotwire
many thanks to you guys. got it
|
All times are GMT -5. The time now is 03:28 PM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.