Running wire from roof LED bar
 

Hello! Need some help figuring out the best place to route wiring on my 2014 EZ GO Express. I will be installing an LED light bar across the front part of the roof and need the wiring to obviously run down into the rocker switch and battery. Any ideas on how to run the wiring without running a tube down the strut? Any method to fishing it through the strut and out at a certain point? Any recommendations/pics will be greatly appreciated.

Thanks!

Re: Running wire from roof LED bar
 

Put some lite string on the end of the wires and use a shop vac to pull the string through the tubing then pull the wire through

Re: Running wire from roof LED bar
 

Thanks for the tip!

Re: Running wire from roof LED bar
 

great tip,
nothing looks worst than an exposed wire hanging off of a roof struct.

Re: Running wire from roof LED bar
 

Wow...that's a great idea. I am installing lights tonight and plan to use this!

Re: Running wire from roof LED bar
 

I always use bailing wire to fish wires through the post, but will have to try that idea. Be sure to keep the wires away while vacuuming the string, vacuum makes huge amounts of static electricity. 8,000 volts and sensitive electronics are not friends ....