2013 Bad Boy Buggy Transmission problem
I know from searching posts I have a potential problem buggy. Mine has actually run pretty good except for some minor issues.
Now the actuator for the gas transmission will not move when the key is turned from R-N-F. I have had a problem with the bolts connecting the linkage coming loose, but now the actuator just does not move. Is there maybe a fuse blown? I tried to disconnect the linkage and put in gear manually but without taking the linkage assembly completely off I could not get it to engage in F or R. I'm actually ok with changing manually if that's possible. I usually just use the electric front wheel drive unless I am going up a hill or in mud. Any help would be greatly appreciated. |
Re: 2013 Bad Boy Buggy Transmission problem
I forgot to mention it was a Ambush model
|
Re: 2013 Bad Boy Buggy Transmission problem
I see 2 possible fuses. Both go to the Transmission Control Module.
1- Fuse 1 is 10 Amp. 2- Fuse 2 is also 10 Amp. Hope this helps & it's just one of these fuses. I see no fuses coming out of the Control Module to the Actuator. Erle |
All times are GMT -5. The time now is 07:12 AM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.