Buggies Gone Wild Golf Cart Forum - My 68 Harley well kinda

The following is pic's of my project 68 Harley. Well that’s what I started with now its
1) Rear 1/2 of a 68 Harley
2) Front 1/2 of a 70s electric 4 wheel cart
3) 292 snowmobile motor
4) Club car rear body
5) Alot of hmmm what to make it work

As the pictures show I went with a jackshaft to transfer the power to the gear box. The secondary clutch just floats on the jack shaft to keep it aligned. The rear end has been welded to get true posi to the ground. At first I was going to put big tires on it but got a little nervous about it after I saw the power it has. Figured it was just a matter of time and I would roll time back on myself. So I'm using the tractor treds and mostly use it on the track I made for my son and his go cart. The track has an oval around it that thing fly’s around (you can drift in the corners because of the torque). The center of the track is a lot of hills and holes that’s fun with ole club car. I would send pics of the track and the carts on it but it’s under about 3 ft of snow right now. The modified cart will do about 35 right now and if you chain it to the wall you can do some awesome burnouts in the barn. The only thing left to do is some cosmetics and changing of the weights in the primary. It doesn’t have the 'snap' it should and I know it’s in the clutching. Well that’s enough of that and glad to met you all.