Front Hub Bearings
Do for you hub bearings for a 2006 DS need to be special ordered or is there an equivalent I could find at an auto parts store?
|
Re: Front Hub Bearings
I've never changed any but they appear to be off the shelf automotive sealed type bearings.
It wouldn't take long to pull one of the front wheels and knock one out, carry it down to the local auto parts store and match it up. You might even be able to get the bearing number without removing the bearing. |
Re: Front Hub Bearings
To confirm what Down South said. Yes all bearings are standard. Auto Parts or a speciality bearing shop would have them.
|
Re: Front Hub Bearings
Yeah you can get them at Napa. I forget the number off hand but they usually have them in stock. If you have time to wait search the bearing number online and order some, you can usually find them for a bit less $$. Don't forget to put the sleeve back in the hub!
|
Re: Front Hub Bearings
6204
|
Re: Front Hub Bearings
Got 'em. And had to laugh at the don't forget to put the sleeve back in comment...because I did on the first one and luckily was able to gingerly pop one back out. I pressed them back in with my vice, seem to spin well...little tighter on the sleeve than before but definitely better with the new bearings
|
All times are GMT -5. The time now is 04:46 AM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.