Adhesion promoter
I am in the process of painting a G19 body. It will require quite a bit of primer. Do I need to apply the adhesion promoter before primer of just before paint is apllied. Thanks
|
Re: Adhesion promoter
Welcome to BGW!
Apply the adhesion promoter before primer. :thumbup: |
Re: Adhesion promoter
My paint guy had me mix the adhesion promoter in with the primer, then the flex additive in with the single stage enamel paint.
|
Re: Adhesion promoter
The adhesion promoter has to go on first. It slightly softens the plastic so the primer will bite in and stick. :thumbup:
|
Re: Adhesion promoter
Thanks to everyone on the feedback
|
Re: Adhesion promoter
If the primer is sanded thru in a few places duirng the 600 grit final sanding, do I need to apply additional promoter, spot prime before top coating? Thanks
|
Re: Adhesion promoter
Quote:
|
Re: Adhesion promoter
Revo is correct, any time you see bare plastic you must re apply the promoter to that area.
|
Re: Adhesion promoter
Thanks very much fellows
|
All times are GMT -5. The time now is 03:56 AM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.