1994 Elegante by Golf and Western Headlight replacement
3 Attachment(s)
I have a 1994 Elegante Golf and Country by Western. The person I bought it from removed the old headlights and replaced them with square lights and didn't add turn signal lights. I'd like to find a replacement that has both headlights and turn single. Any Ideas? I have pictures of the new lights and the old.
|
Re: 1994 Elegante by Golf and Western Headlight replacement
1 Attachment(s)
I added this picture in case I was wrong about the year
|
Re: 1994 Elegante by Golf and Western Headlight replacement
I was wondering if this was the right section to post this. I hadn't had any replies. Do I need to move it? :help:
|
Re: 1994 Elegante by Golf and Western Headlight replacement
Hi, welcome and nice cart. You are going to have a very hard time finding replacements. The most likely reason that the previous owner replaced the lights is because the clear surrounds like you posted in the third photo turn yellow and cloudy over time and don't look very good. The only possible solution is to find a parts cart or somehow make your own mold. These were carts built by the western company on an ezgo frame. They still make carts but your body style is from the 90's and it has changed since then a few times. You could try and contact Lido Motors which is also Western golf cart and see if by some chance they have any leftovers but I would doubt it. Sorry I don't have better news. If it were me I would try and get creative and integrate some sort of turn signal assembly on the side. Whoever had the cart before did a pretty good job integrating the replacement headlights. Those might even be the factory headlights and they just removed the surround that included the turn signals. Another tip as I currently have 2 westerns and have had several prior... if you want to replace the chrome trim if you have any scuffs on the front or back it is stick on. Measure the width and you can get it on amazon.
|
Re: 1994 Elegante by Golf and Western Headlight replacement
Thanks Golf cart man. I do appriecate your comments. I'm pretty lucky that I work in a place that have 3D printers. I was thinking about printing some trim to replace the missing chrome trim around the headlights. Then as you suggested come up with a way to add the turn signals on the sides of the cart. Thanks again!!
|
Re: 1994 Elegante by Golf and Western Headlight replacement
Where can i buy a solenoid for my 42v western.
|
Re: 1994 Elegante by Golf and Western Headlight replacement
Quote:
|
All times are GMT -5. The time now is 03:38 PM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.