2016 EZGO Shuttle 2+2 TXT
 

Just got our first buggy. Refurb cart from a local dealer. They didn't have the turn signal switch in stock, so took it back today for the install. Hope to have it back tomorrow.

Appears completely stock except the 10" wheels with 205/65/10 Kenda Loadstar tires.

Very pleased, pulled 21 mph (via gps speedo phone app) with driver only. Has nothing I don't want.

I'm not going down the rat hole of crazy mods with this. Just want to maintain it the best I can and enjoy it.

But. LED bulbs. and maybe a 12v port for a USB charger. And a locking glovebox kit.

Re: 2016 EZGO Shuttle 2+2 TXT
 

Nice lookin cart! :thumbup:

Re: 2016 EZGO Shuttle 2+2 TXT
 

Thanks, Ron.

I have bonded with my buggy already through some troubleshooting.

Got it back from turn signal install today with no functioning headlights. Pulled the key switch from the dash and the wire had come off. Lights now working.

I had noticed before that the headlights would glow dimly when the brake lights were on. The tail lights seemed to be on the bright filament and the brake lights on the dim filament.

The rear bulb holders were wired incorrectly. I reconfigured the connectors per the EZ GO Parts manual and it's all good to go. Every thing works. Tail lamps are there and the brake lights are bright. Indicators work as they should. Headlamps don't come on dim when the brake lights are on.

My buggy now.

Re: 2016 EZGO Shuttle 2+2 TXT
 

Also, registered 24 mph on GPS speedometer phone app with the throttle matted. It scoots along pretty nicely. Still working on tire pressure, the LoadStars have a very rounded tread even at 15 psi.

Re: 2016 EZGO Shuttle 2+2 TXT
 

Installed led brake/tail bulbs and the flasher blinks normally. Cool!

Re: 2016 EZGO Shuttle 2+2 TXT
 

Nice cart! :thumbup: