|
Distance between Clutches
I am going to be putting in a Kawasaki 440 Motor in my 84 EZGO. Before I pulled the old motor out I failed to measure the distance between the clutches so I could make sure I got the correct belt length.
Any one know how far apart the clutches should be? |
Re: Distance between Clutches
Get the belt you want first then bolt the engine down to fit the length of the belt you have.
|
Re: Distance between Clutches
How much slack should the best have at idle?
|
Re: Distance between Clutches
1 Attachment(s)
pics of ezgo, with new belt .....CLutch was machined so this is a bit tighter than stock....it shifted OK but, you wouldn't want it any tighter..... the new belt has stretched out someand now it shifts fine.
|
| All times are GMT -5. The time now is 03:54 AM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.