RHOX LIFT-100 6" Lift Drop Spindle Steering Stabilizer?
 

Hi Everyone,

I put a RHOX LIFT-100 on my 94-01.5 DCS TXT and the new spindles do not have the mounting plate for the E-Z-GO MEDALIST / TXT STEERING STABILIZER KIT (FITS 1994.5-2001.5).

I was wondering if anyone has successfully installed an aftermarket steering stabilizer on a similar lift kit or even made one for their cart?

I was figuring I could put a clamp on the spindle to bolt the stabilizer to but, not sure if this is a good idea or which parts to use. I wouldn't want it to slip and as the new spindle is cast welding a new mounting plate to it would be difficult and expensive.

Thank-you!
Impaled

Re: RHOX LIFT-100 6" Lift Drop Spindle Steering Stabilizer?
 

Not that it helps but that extra arm on the passenger side stock spindle was for towing carts, I think that's what the aftermarket stabilizer was hooked to and as the ad says "for 4" Economy Lift Kits only" which uses stock spindles.

Re: RHOX LIFT-100 6" Lift Drop Spindle Steering Stabilizer?
 

Thanks. Always wondered what that was really intended for. Need to put a stabilizer now that I have a Navitas TSX3.0 600amp controller and the Navitas High-Performance motor in the cart. Wheel goes crazy over 25km/h. Steering on this old DCS style TXTs sucks.