Hey old timers on the board..
My friend bought one of them ezgo diamond plate industrial carts, the one that hangs over in the front and has a flat bed. I remember seeing one on here that was lifted but can't find it, anyone remember it or who had it? Thanks SB
(also posted this in ezgo section) |
Re: Hey old timers on the board..
Rifter built one... I know that there was another one also, but I can't remember who's it was. :dontknow:
http://www.buggiesgonewild.com/big-b...-pit-cart.html |
Re: Hey old timers on the board..
Those things are cool. I remember seeing a few on here.
|
Re: Hey old timers on the board..
I don't have pictures, but I had a customer's cart in the shop: 1980 Cushman flat bed industrial cart. It had been a 36 volt electric, but the owner had pulled all that out and installed a 670cc Predator chain drive to a solid rear axle on a swinging "U" bracket with coil springs. Front suspension was off a Yamaha quad, including a chunk of the quad frame to swing the control arms. He got that far but wasn't sure how to give it steering, brakes, etc. I used the original Cushman steering box to swing a fabricated drag link to the left steering knuckle. The quad's tie rods connected to a common center pivot point so the right side got pulled along with the left. Old Cushman hydraulic master cylinder to Rhino brake calipers (2 in front, 1 on the solid rear axle).
|
Re: Hey old timers on the board..
|
Re: Hey old timers on the board..
The front axle is the challenge. We welded some longer leaf spring mounts on our project. It doesn't give more ground clearance but it allows for a bigger tire.
|
Re: Hey old timers on the board..
Thanks guys for the input, that monster cart is cool. My friend's has a flat angled frontend and all diamond plate with a flat bed. meimk has me thinking now it just might be a Cushman :oops: I'll try to get the pictures of it.
|
Re: Hey old timers on the board..
|
Re: Hey old timers on the board..
Quote:
|
Re: Hey old timers on the board..
3 Attachment(s)
Well I guess it is an ezgo rib, I was wrong on it being all diamond plate, the sides are not. Anyone seen one of these lifted?
|
All times are GMT -5. The time now is 03:59 AM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.