Liitle help with throttle setting on DCX500 please...
Is there some way to get the throttle to 100% right from the start? No matter which profile or how I have the throttle up rate set, it takes about 2 seconds for the throttle to actually reach 100%.
12/22/11 19:29:29.727 0,19.3,51.4,0.0,0.0,0x00 12/22/11 19:29:29.805 7,19.3,51.3,55.0,3.7,0x00 12/22/11 19:29:29.883 10,19.3,51.2,147.0,14.4,0x00 12/22/11 19:29:29.977 15,19.8,50.9,303.0,46.3,0x00 12/22/11 19:29:30.055 22,19.3,51.2,529.0,118.2,0x10 12/22/11 19:29:30.148 29,19.3,48.3,565.0,166.2,0x00 12/22/11 19:29:30.226 33,19.3,47.7,584.0,194.7,0x00 12/22/11 19:29:30.320 36,19.3,47.7,552.0,199.2,0x00 12/22/11 19:29:30.398 39,19.8,46.7,524.0,205.5,0x00 12/22/11 19:29:30.491 41,19.3,46.2,552.0,227.3,0x00 12/22/11 19:29:30.569 45,19.3,46.4,538.0,244.7,0x00 12/22/11 19:29:30.647 49,19.3,45.9,496.0,245.1,0x00 12/22/11 19:29:30.741 52,19.3,45.0,524.0,271.2,0x00 12/22/11 19:29:30.819 55,19.8,45.2,533.0,292.6,0x00 12/22/11 19:29:30.913 60,19.8,45.0,469.0,283.2,0x00 12/22/11 19:29:30.991 64,20.3,43.9,506.0,321.5,0x00 12/22/11 19:29:31.084 65,20.3,44.5,510.0,330.0,0x00 12/22/11 19:29:31.162 69,19.8,43.7,478.0,328.0,0x00 12/22/11 19:29:31.256 70,19.3,43.7,496.0,346.2,0x00 12/22/11 19:29:31.334 76,19.3,43.5,496.0,379.3,0x00 12/22/11 19:29:31.427 82,19.8,42.5,473.0,389.5,0x00 12/22/11 19:29:31.505 84,19.3,42.3,510.0,430.0,0x00 12/22/11 19:29:31.599 89,20.3,42.7,478.0,427.4,0x00 12/22/11 19:29:31.677 90,19.8,41.9,483.0,435.6,0x00 12/22/11 19:29:31.771 100,19.3,41.7,501.0,501.0,0x00 12/22/11 19:29:31.849 100,20.3,41.5,464.0,464.0,0x00 12/22/11 19:29:31.942 100,19.3,41.0,464.0,464.0,0x00 12/22/11 19:29:32.020 100,19.3,41.3,432.0,432.0,0x00 12/22/11 19:29:32.098 100,19.3,41.6,404.0,404.0,0x00 12/22/11 19:29:32.192 100,19.3,42.5,377.0,377.0,0x00 12/22/11 19:29:32.270 100,19.3,43.2,345.0,345.0,0x00 12/22/11 19:29:32.363 100,19.3,43.2,322.0,322.0,0x00 12/22/11 19:29:32.441 100,19.3,43.5,299.0,299.0,0x00 |
Re: Liitle help with throttle setting on DCX500 please...
Terry, I think that is about as fast as the Alltrax will get to 100%. All of my charts looked like that, with ramp up set to highest. This is whiplash protection! Logisystems has the fastest ramp up, I think 1 second to 100% in their race controllers, but they are currently shut down:cry:
|
Re: Liitle help with throttle setting on DCX500 please...
Quote:
|
Re: Liitle help with throttle setting on DCX500 please...
Every Sepex cart I have driven (including AC carts) have sloppy throttle response. The Series carts seem to react much faster.
|
Re: Liitle help with throttle setting on DCX500 please...
Quote:
The irritating thing to me is that it is instant on in reverse and so sloppy in forward. It'll throw you over the windshield in reverse. :roll: |
Re: Liitle help with throttle setting on DCX500 please...
Mine is the same way T. You feel it like crazy in reverse. It will give you forward
Whip lash but in forward it's like okay where did the feeling go. |
Re: Liitle help with throttle setting on DCX500 please...
Terry, also with 8:1's it will take a lot of amps (torque) to pull the wheels up. Jumping from 12.44:1 to 8's kills your low end torque and most of the guys pulling the wheels up are pushing much more than 500 amps. I wouldn't worry, you're losing mph when they pop up....but, I does look cool! Do you spin the wheels pretty good? If so a taller tire may give you a wheelie. If the power is there the small tire will break lose, larger tire will have more traction and lift it up. Reverse??? Spin your axle around and drive in reverse!! Just undo the 1/2 speed cable!:lol:
|
Re: Liitle help with throttle setting on DCX500 please...
Quote:
The testing I did showed that the 300' times and mph were actually better with the 8:1 gears vs the 12.44:1 gear. I really expected the low end to suffer with the higher gear but the motor is pulling 150 more amps with the 8:1's which is obviously offsetting the gear and then some. The cart is 1/10 sec. or so quicker and about 3 mph faster at 300' after the gear change. I'm super happy with the 8:1's but might try 6:1's later to see what happens. I'd strongly considered getting a DCX600 but was told that it probably would not make any difference. I'd like to try it for myself but it's a bunch of money to spend on something that "might" work better. It kinda surprised me that the motor pulled 584 amps with the DCX500. The motor is running so cool that I feel like we could show it some more amps and not hurt anything. |
Re: Liitle help with throttle setting on DCX500 please...
Cool. Also, the colder the Alltrax's are the more amps you can slip past them. Least I've seen, well also one of their techs said this as well. He told me if I had time to disconnect between races and put my controller in a ziplock bag, put it in my cooler and it would let more amps thru. I found with my AXE 7245 I could get up to 693 amps thru it for a second, even though rated for 450amps.
Sounds like you got a good motor, torque and speed....it's hard to have both. |
Re: Liitle help with throttle setting on DCX500 please...
Quote:
|
All times are GMT -5. The time now is 11:03 PM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.