simple steering wheel puller
3 Attachment(s)
over the past weeks I saw a lot of how do I pull my wheel off.from drilling and tapping and cutting and the worst of all hammering on CC the bushings are held in by plastic, they crack, I don't no about the others I haven't broke those yet this works for me and it was cheap to make 1/4x2x16 long flat stock, enough to go under both sides,nut and bolt from old puller,use a screwdriver to lift wheel while tapping it through,line it up,put nut up to flat stock.tighten down, doesn't need a lot of pressure,light tap, pop
|
Re: simple steering wheel puller
nice!! Exactly like a gear puller....except not...but almost!!
|
Re: simple steering wheel puller
Nice good thinking!!!
|
Re: simple steering wheel puller
It doesn't get any simpler than that :thumbup:
|
Re: simple steering wheel puller
Old lawn mower blade may work also and already has the hole in the middle
|
All times are GMT -5. The time now is 12:57 AM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.