1981 2pg Top end rebuild.
Thought I would share my rebuild of a 1981 EZGO 2pg. I bought this cart and quickly found out it had no compression. Upon dis-assembly of the engine I found the rings were "frozen" to the piston and it looked like the last owner ran it without oil in the gas. Well I bought a top end kit from Everything Carts and put it all back together. This forum helped a bunch for technical details and specs.
Thanks all. Here's some pics.... http://i258.photobucket.com/albums/h...eseBday073.jpg http://i258.photobucket.com/albums/h...eseBday071.jpg http://i258.photobucket.com/albums/h...rch2009019.jpg http://i258.photobucket.com/albums/h...rch2009020.jpg http://i258.photobucket.com/albums/h...rch2009022.jpg http://i258.photobucket.com/albums/h...rch2009021.jpg http://i258.photobucket.com/albums/h...rch2009014.jpg http://i258.photobucket.com/albums/h...rch2009012.jpg http://i258.photobucket.com/albums/h...rch2009011.jpg I took it for it's maiden run today, and while it's no speed demon, it ran like a champ! NEXT ....BODYWORK!!! |
Re: 1981 2pg Top end rebuild.
it feels good to bring something back to life:thumbup:
good job! |
Re: 1981 2pg Top end rebuild.
Quote:
Yes...yes it does....thanks! |
Re: 1981 2pg Top end rebuild.
thanks for sharing, it's good to see guys with the 2 stroke carts posting about them. There's a bunch of them around but they don't seem to get the attention they deserve. :thumbup:
|
Re: 1981 2pg Top end rebuild.
great job.
|
Re: 1981 2pg Top end rebuild.
nice post i have a 1982 ez go and it has the same probelm . now that i saw what you did i think i can do that ... where did you buy your top end rebuild kit from? brad
|
Re: 1981 2pg Top end rebuild.
Quote:
Everythingcarts.com, one of this sites sponsors. It's really not that bad of a project. Only thing I would do different it seal the new cylinder to the crankcase with some Black RTV. Also make sure you place your rings in the correct orientation (bevel up) and the head gasket with the widest metal edge turned down. Thanks all for the comments! |
Re: 1981 2pg Top end rebuild.
cool thanks
|
Re: 1981 2pg Top end rebuild.
In your second picture....is that just a bolt and a washer for a motor mount?
|
Re: 1981 2pg Top end rebuild.
5 Attachment(s)
i also posted this on a different thread.
check it out, it might help. RUREDY, WILL YOU STICKY THIS WERE OLD EZ-GOERS CAN FIND IT |
All times are GMT -5. The time now is 02:06 PM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.