Charging problem
 

I have a problem with my bateries taking a charge. I believe the problem is in the connection. When I plug the charger in, a short hum then stops. I push the plug all the way in......nothing. At times, I can lift the seat or wiggle the cord and the charger starts. Lately, it just won't do anything. Once, I left it all plugged in, went in for supper,came out and the charger was working. My batteries are fine I think. When charged, they last days at 15 to 30 minute usage intevals. I think I have a marathon. The charger is model #26984 Total Charge 3. Mfg date1989. After examining the contacts, they appear fine, but one is fixed and has no give like the other. The receptacle is an Anderson, but it is not in a housing in the frame. It is affixed to a piece of steel. The DC cord is old and appears to have been replaced at some point before I got it. 3 questions........does this sound like a fix that new plugs and receptacle might take care of? Does it matter what size I use.....SB50, SB175, or SB350? Could the problem be something different? Help is greatly appreciated.

Re: Charging problem
 

Yea, sounds kinda like a bad plug. I would replace both of the SB50's while your in there just to eliminate both of them. Wouldn't hurt to check out the charge wires too.

Re: Charging problem
 

Thanks Roady. I am unclear about something........the plugs are grey. Aren't SB50 plugs black? Does my charger need SB50 or does it matter?

Re: Charging problem
 

Welcome to the forum knew1.....................

Re: Charging problem
 

Thnx Rusty

Re: Charging problem
 

lots of problems with dirty connections on them, if you can replace the end off the charger and replace the whole charge receptical that should take care of everything........................................ ........8)