I want to raise my Jakes 6" lift another inch for a total of 7".
Ok so I bought and installed a Jakes 6" lift. My 25" dirt devils should be here any day. I had planned on running 23" tires but changed my mind after I installed the lift. So what can I do to make 25" wheels fit? I do not want to buy another lift:)
Thanks Ralph |
Re: I want to raise my Jakes 6" lift another inch for a total of 7".
Ralph I can't remember what kind of cart you have. :help:
|
Re: I want to raise my Jakes 6" lift another inch for a total of 7".
He has an Ezslow I belive.
|
Re: I want to raise my Jakes 6" lift another inch for a total of 7".
If you have a ClubCar, you could add a leaf like I did for 1-2" more. I did it to all 3 springs and I run 22x11-10s with plenty of clearance. It wasnt that expensive either. I also have the 6" Jakes spindles.
|
Re: I want to raise my Jakes 6" lift another inch for a total of 7".
As I remember it's a 97 ezgo w/spindle lift?
If so... You could use 1" blocks btwn the back of the front springs and the body, Another option would be welding some new spring perches on top the stock axle and mount the springs on top, running the bolts down through both sets of perches. (axle clamped in and stronger) see my txt pic below. |
Re: I want to raise my Jakes 6" lift another inch for a total of 7".
Sorry guys stovebolt is right 97 EZGO gas. Where might one buy some blocks? I want it to look nice and not some hack job:)
|
Re: I want to raise my Jakes 6" lift another inch for a total of 7".
Quote:
|
All times are GMT -5. The time now is 03:11 AM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.