Hit a bump
Was moving my 99 workhorse a bit too fast
Hit a bump too hard and broke the bracket that holds the spring to the rear axle, on the right hand side. Found a tree branch and was able to stick it under the bed and hold the cart up. At this point I was within 1/2 inch of normal. Found some barbwire on a fence that wasn't needed, and wrapped the springs to the axle with the help of my vice grips. Was able to drive home, though I went a lot slower and tried missing all the bumps. Got the top part of the bracket off, but I'll probably have to cut the U bolts to get everything off. I have a 78 EZGO electric in the barn. Will the rear spring bracket from that cart fit the workhorse, or will I need to buy a new one? Thanks for any help. |
Re: Hit a bump
Local dealer had one, $18 and the barbwire is not needed anymore.
|
Re: Hit a bump
Quote:
|
Re: Hit a bump
Thought for sure a dealer would want $40 or so since they kind of had you. Was glad to find out only $18.
|
All times are GMT -5. The time now is 11:36 PM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.