Buggies Gone Wild Golf Cart Forum

Buggies Gone Wild Golf Cart Forum (https://www.buggiesgonewild.com/index.php)
-   Gas EZGO (https://www.buggiesgonewild.com/forumdisplay.php?f=15)
-   -   Starter Mounting bracket (https://www.buggiesgonewild.com/showthread.php?t=19873)

bustin-bs 07-11-2009 10:58 AM

Starter Mounting bracket
 
Hate to bother did a quick search didnt see it posted, im looking for the bolts for the starter mount that attaches the mount to the motor. Last night at the river my ez go was a no go. Pulled the seat up only to see that all 4 bolts were missing. I assume they vibrated loose, of course there was a few other bolts missing and some one could have come by and taken them since we store the cart at the river. Never the less i am less the four bolts that mount the bracket to the motor. Any one know what size these are, thread ect? I would assume they are 1/2 inch long but dont know the thread pitch.Any help is greatly appricated. Thanks in advance...

2 stroke Robin motor...

Goat53 07-11-2009 05:27 PM

Re: Starter Mounting bracket
 
mine came from the local hardware store , I think 10mm wrench fit mine so that would make it a 7mm bolt1.0 thread pitch and I'd get 3/4 inch and a washer or 2

bustin-bs 07-12-2009 06:42 PM

Re: Starter Mounting bracket
 
Okay 7mm bolt 1.0 thread pitch and 3/4 inch in legnth, looks like im gonna have to take a trip to the hardware store....
thanxs...


All times are GMT -5. The time now is 04:46 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.