120sx controller
I have a 10 pin card on top of controller can anyone tell me how much voltage is supposed to come out of the wires, there are 9 of them, are they all supposed to be the same voltage or some less. ? this is a 1206sx controller. I think. I have a ezgo txt e598 modelpds
|
Re: 120sx controller
Johnnie ......where r u ? :lol:
|
Re: 120sx controller
I think I found the answer. thanks,
|
Re: 120sx controller
Us old guys have to take naps occasionally. :lol:
He said he got the answer, but didn't say what the answer was, so I'll take a stab at it from what he provided. The date code (E598) indicates it was made in 1998. A Curtis 1206SX is a DCS controller, further confirmed by a 10 pin plug, since a series controller (Curtis 1206) has a 6 pin plug and a PDS controller (Curtis 1206MX) has multiple plugs. Sounds like he has a 1998 DCS, but it could be a Medalist (Metal body) or a TXT (Plastic body), or one of the other body styles EZGO made in 1998. As for the voltage on the pins. it depends on how the Run/Tow, F/R and Key switches are set and if the pedal is pushed or not. |
All times are GMT -5. The time now is 12:41 PM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.