Buggies Gone Wild Golf Cart Forum

Buggies Gone Wild Golf Cart Forum (https://www.buggiesgonewild.com/index.php)
-   Electric EZGO (https://www.buggiesgonewild.com/forumdisplay.php?f=16)
-   -   Forward/Reverse switch upgrade for pds cart (https://www.buggiesgonewild.com/showthread.php?t=61913)

2old2fit 03-26-2012 08:30 PM

Forward/Reverse switch upgrade for pds cart
 
I'm upgrading motor (GE D1162), controller (DCX 500 alltrax), solenoid and cables on my 2001 ez go txt. Is a heavy duty forward/reverse switch required for a pds cart or is the standard toggle f/r switch alright? I can't find any information for a heavy duty f/r switch for a pds cart.

kgsc 03-26-2012 08:41 PM

Re: Forward/Reverse switch upgrade for pds cart
 
low current so the factory switch will be fine. If you are looking for something different, I saw where someone on here put a club car Presedent FNR switch on. Looks pretty sweet.. Need to find that one again..

2old2fit 03-26-2012 09:07 PM

Re: Forward/Reverse switch upgrade for pds cart
 
thanks. Does the controller need to be in an enclosure. I thought I read somewhere that you should cut off the enclosure below the run/tow switch and leave the controller exposed.

kgsc 03-27-2012 06:16 AM

Re: Forward/Reverse switch upgrade for pds cart
 
The answer is yes, you can cut it off but I would only cut off say half. I still like the idea of keeping at least the solenoid covered. Probably not required but makes me feel better and it keeps bad things from happening if you say drop a wrench in there...


All times are GMT -5. The time now is 07:13 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.