xct controller install ??
1 Attachment(s)
I need some help,I have only worked on Exgo carts. Installing a XCT 48400 controller in a 2010 Precedent cart. I must have the controller mounted wrong because multi-plug wire will not reach the controller plug??http://www.buggiesgonewild.com/attac...1&d=1490495710
|
Re: xct controller install ??
Looks like you need to rotate it 180 degrees
|
Re: xct controller install ??
|
Re: xct controller install ??
1 Attachment(s)
This is how I did mine on my 2012 Precedent.
|
Re: xct controller install ??
1 Attachment(s)
This is how I did mine. I had to re route the main multi plug cable, and pull the extra slack out of it.
Attachment 149347 |
Re: xct controller install ??
Please note that You should not use a pre-charge resistor with the XCT controller.
|
Re: xct controller install ??
Quote:
I installed it because it came with the solenoid. But according to Scotty: "There is no harm in having the diode on the solenoid even if the controller has an internal diode. This would just be redundant protection." http://www.buggiesgonewild.com/elect...updates-5.html If there is a problem I will remove it. |
Re: xct controller install ??
Quote:
|
Re: xct controller install ??
Quote:
http://www.alltraxinc.com/files/Doc1...ns-Learned.pdf |
Re: xct controller install ??
Those are just generic notes written 7 years before the XCT was introduced, and do apply to most controllers.
Look at the install diagram for Club Car IQ/Excel: http://www.alltraxinc.com/files/DOC1...Q-WIRE-DIA.pdfNote #4 (upside down triangle) on the right side of the page. |
All times are GMT -5. The time now is 08:39 PM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.