96 cc no go after washing
 

gOOD AFTERNOON;
I HAVE A 96 CC FULLY CHANGED OVER TO SERIES WITH 2 GAUGE WIRES AND
WILL RUN TO 29 MPH WITH FULLY CHARGED BATTERIES. IT HAPPENED TO ME
TODAY AFTER WASHING AND WAXING CART, IT WILL NOT MOVE. THE SOLONOID
CLICKS, BUZZER IN REVERSE BUT NO MOVEMENT. I ONLY WASHED THE OUTSIDE OF CART, NO WATER IN BATTERY AREA. ANY IDEAS?:cry:

Re: 96 cc no go after washing
 

Check the micro switches and FNR lever for moisture. Blow them out as if your solenoid is actually "clicking", you should be getting some movement unless the controller or motor has an issue (or solenoid is stuck internally). Start troubleshooting.

Re: 96 cc no go after washing
 

yOUR CAPS LOCK IS STUCK TOO.

Re: 96 cc no go after washing
 

Like Nole said, check for moisture in those areas. Chances are it will dry out soon and go back to working.