|
2000 EZ-GO Workhorse - tire size? Belt size?
Just got a 2000 EZ-GO Workhorse ST-350 that has been sitting a long time. Put new carb on it, cleaned fuel, etc and runs ok.
Two questions please: Has weather cracked 21x9.00x10 tires on it. Will 22x10x10 fit - appears already lifted? read that a shorter belt will improve low in pull? Can anyone recommend? |
Re: 2000 EZ-GO Workhorse - tire size? Belt size?
If the front axle is straight across 22s will not fit. As for the belt you can put a shorter belt on there but most workhorses already have a gear ratio setup for more torque so I would just run the standard length HD belt.
|
Re: 2000 EZ-GO Workhorse - tire size? Belt size?
thank you... It has 21 now - believe it is already factory lifted?
|
Re: 2000 EZ-GO Workhorse - tire size? Belt size?
Straight axle no, curved axle yes.
|
Re: 2000 EZ-GO Workhorse - tire size? Belt size?
Thanks for the info. It is a curved front axle. It currently has 21", I would go back but cannot find 21's. I don't want to go smaller if I can make the 22" work. Appreciate your input.
Trying to input photos |
Re: 2000 EZ-GO Workhorse - tire size? Belt size?
Lot of the workhorse carts came with a Stryker 21 tire. They are still out there but 22" are easier to find. Depending on what shape the suspension is in it might rub a little when flexed hard.
|
Re: 2000 EZ-GO Workhorse - tire size? Belt size?
My workhorse has 22/9/10s with no problem and they look great
|
| All times are GMT -5. The time now is 08:34 PM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.