FS: Alltrax 400A for EZGO Series
4 Attachment(s)
I have a new old stock alltrax 400 amp controller for an EZGO. Here's the deal. I purchased a parts lot that had a bunch of stuff I wanted to build a couple of cars. I acquired some parts in the lot that I knew I would never use but have been holding on to them for too long and its time to try to recoup some of my money. This controller has never been used but has some scuffs and what not from being moved around and sitting on the shelf, work bench, or wherever else it got placed. Here are the specs:
Alltrax NPX4844EZ Motor Controller - Fuse Included Features include: •Alltrax NPX 4844EZ •E-Z-Go '95 & newer •Medalist & TXT with ITS throttle •400 Amps •24-48 Voltage Range Manufacturer's website Alltrax Inc •Integrated anodized heat-sink with multi bolt pattern for flexibility •Fully encapsulated epoxy fill - environmentally rugged design •Available in 300 & 400 amp versions •Advanced MOSFET power transistor design for excellent efficiency and power transfer •1/2 Speed reverse option and "Plug Brake" options available •Type: DC "SERIES WOUND" motor controller • Under-voltage cutback: adjustable ◦16-30 VDC, preset to 12 volts under your battery pack voltage • Over-voltage shutdown: adjustable ◦30-60 VDC (48V models) (60VDC MAX) •Operating Frequency: 18kHz •Control voltage range; Key, Throttle and Reverse inputs: •Reverse Horn Output: 50mA sink max •Standby Current (Powered Up): < 35mA •Throttle Input: ◦ITS (inductive) ◦Resistive 0-5K ohm (+/-10%) ◦5K-0 3 wire Club Car (+/-10%) •Operating Temperature: -25C to 75C, 95C shutdown •Ratings NPX Models 4834 4844 Current Limit 300A 400A 2 Min. Rating 300A 400A 5 Min Rating 200A 300A I will ship it to your door for $185.00 |
Re: FS: Alltrax 400A for EZGO Series
Price Drop..... Shipped to your door for $160.00
|
Re: FS: Alltrax 400A for EZGO Series
Have a 2001 EzGo DS series 36 V would this work on it?
Sent from my iPhone using Tapatalk |
Re: FS: Alltrax 400A for EZGO Series
It will not.
|
Re: FS: Alltrax 400A for EZGO Series
Quote:
Is yours a series drive cart? I don’t think they did DCS in 2001. Where’s the forward and reverse switch on your cart? |
Re: FS: Alltrax 400A for EZGO Series
It’s located under the seat mounted to the outside
Sent from my iPhone using Tapatalk |
Re: FS: Alltrax 400A for EZGO Series
Sorry I’m new to Golf carts and I may not have correctly identified my cart. It doesn’t have the forward/reverse switch on the dash. I tried to post a pic but since I’m a new member it will not let me.
Sent from my iPhone using Tapatalk |
Re: FS: Alltrax 400A for EZGO Series
Wifeslave, it may work for you then. I need some more details about your exact cart model. Do you have a Run/Tow switch in addition to the F/R lever? Maybe a VIN could help.
|
Re: FS: Alltrax 400A for EZGO Series
Quote:
Does it have a rod coming from the back side of the FNR lever going to a mechanism under the passenger side? If so, it’s definitely a series cart. |
Re: FS: Alltrax 400A for EZGO Series
Would this work on a solid state Marathon? I'm planning on going to 48V and was looking for a 400 or 500 amp Alltrax controller. It's a series cart.
|
All times are GMT -5. The time now is 06:02 AM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.