EZGO 2008 Castle Nut Size Front Wheel Assembly
Just got a drop axle kit for my 08 EZGO, thought I would knock it out in one evening, not. Need to know what size socket to buy for front castle nut.....took wheels off, dust cap, and whoa!!! One inch socket worked on older txt electric ezgo's wheel assembly castle nuts, but this thing is huge. Also, this drop axle kit is a 5 inch lift, but rear blocks are maybe 2". Does the front help lift the whole cart otherwise the cart isn't going to be level? Any help, appreciated. Thanks, Adam.
|
Re: EZGO 2008 Castle Nut Size Front Wheel Assembly
http://i137.photobucket.com/albums/q...o-26868014.jpg
can you measure it ? i found the larger nut no size is given |
Re: EZGO 2008 Castle Nut Size Front Wheel Assembly
I could have, lol! But, I put the cap and wheels back on and rolled it back under the carport.
|
Re: EZGO 2008 Castle Nut Size Front Wheel Assembly
well happy days ... look what i found !!!!
|
Re: EZGO 2008 Castle Nut Size Front Wheel Assembly
That was informative, thanks! The guy just used a large set of pliers on the front castle nut, so no socket needed I guess.
|
Re: EZGO 2008 Castle Nut Size Front Wheel Assembly
also shows why your rear block is 2" .. it puts leaf springs on top of axles addin 3" so it should be level
|
Re: EZGO 2008 Castle Nut Size Front Wheel Assembly
Yes, makes since now. Thanks for the help!
|
Re: EZGO 2008 Castle Nut Size Front Wheel Assembly
glad i could help .. one thought i had as i watched video .. you have tires off so go ahead and grease the ball joints and the king pin and top off your rear dif oil also check the rear bushings and replace if needed :thumbup:
|
All times are GMT -5. The time now is 07:35 PM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.