Melex wiring diagram
 

I am helping a friend with a melex model 212 serial #159401. The wires are melted and it is impossible to see where they connect. I think it looks very similar to some ezgo's that I have worked on. I have looked at several wiring diagrams listed in this forum but I need one that shows every wire including all of the microswitches. This one also has a capacitor that I do not see in any of the diagrams. Thanks.

Re: Melex wiring diagram
 

Melex's were clones of ezgo's thats why they look familiar. Capacitor? If its across the solenoid there is no need for it, it's not stock. Someone put it on there. Locate an ez diagram and it'll be the same.

Re: Melex wiring diagram
 

I've got one here from my old 212 :mrgreen: You can download this and view it as large as you want ....

Re: Melex wiring diagram
 

Afetr I posted I realized the capacitor was not a capacitor but the backup buzzer. I have this diagram and the one with the coils in the rear. Neither one show the wiring for the microswitches at the FnR or the accelerator.

Re: Melex wiring diagram
 

Like Roady89 said they just copied Ezgo. Do you have one micro at the F&R? If so power comes from the key switch and goes to the positive solenoid activation terminal. :thumbup: hope this helps.