|
96 ezgo headlights not working
I just bought a 96 ezgo from a second party. It came with headlights but they wont come on,I chased the wires to a toggle switch and then to the batteries. Now there isn't a resister in the line anywhere and I looked at the helegon bulbs and they say 12 volt on the back of it. Is a resister needed for my 36 volt system??????
|
Re: 96 ezgo headlights not working
WELCOME to the forum:mrgreen:
Have you posted this in the EZGO section? Also, check out the wiring diagrams for EZGO carts listed in the 'stickies' portion at the top of the EZGO section. |
Re: 96 ezgo headlights not working
No resister needed--Just catch two of the 6v batteries. Neg & Pos and you have 12V. You may find wires hooked up like this already.
|
Re: 96 ezgo headlights not working
See wiring diagram to pick up 12v on following thread:thumbup::thumbup:
|
Re: 96 ezgo headlights not working
Here is a typical battery setup. Any of the batteries with the cable connecting them together can be used.
Here is the pairs you can use by this picture. #1 is + #2 is -. B-#1 and #2 #2-#3 #3-#4 #4-#5 #5-#6 These are the only way you will get 12 volts any other combo will blow the bulbs. http://216.77.188.54/coDataImages/p/...batteries-.jpg |
Re: 96 ezgo headlights not working
Hey guys thanks for the help and info on the 12 volt hook up. I took the light bar off and found that one of the halagon bulbs was broken, so I'll replace both bulbs and give it a try. THANKS AGAIN:wink::thumbup:
|
Re: 96 ezgo headlights not working
Glad to help. We are like the United Givers only we get paid the big $$.:thumbup::thumbup:
|
| All times are GMT -5. The time now is 09:01 PM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.