Buggies Gone Wild Golf Cart Forum
Page 1 of 4 1 23 > Last »
Show 40 post(s) from this thread on one page

Buggies Gone Wild Golf Cart Forum (https://www.buggiesgonewild.com/index.php)
-   Bike & ATV Engine Swaps (https://www.buggiesgonewild.com/forumdisplay.php?f=90)
-   -   Rear end strength (https://www.buggiesgonewild.com/showthread.php?t=75123)

Tonka329 01-19-2013 02:19 PM
Rear end strength
 
Can the stock rear end of a cart hold up to the power of a 140hp streetbike motor?

pachanga90 01-19-2013 03:05 PM
Re: Rear end strength
 
One Way To Find Out!!!We need a test-report!!!:lhmo::lhmo::lhmo::thumbup:

Tonka329 01-19-2013 11:01 PM
Re: Rear end strength
 
HAHAHA!! I need to build my G9/Scrambler cart first... Hope someone will chime in here that has experience in doing the streetbike motor...

Tonka329 02-01-2013 11:14 AM
Re: Rear end strength
 
2 weeks/100 views and no more replies??:oops: I feel like I may be over my head here with a Streetbike engine build...:lhmo: Maybe I will stick with the ATV/LT build first and see how that goes:thumbup:

JRL 02-11-2013 03:08 PM
Re: Rear end strength
 
Answer: No. It won't. Best is ATV style chain drive such as Suz or Kaw 450.
Get good brakes with ATV axle assembly. OR, go with open drive desert racer drive..$$
Ratios of OEM cart final drive are all wrong too.
JR

Tonka329 02-11-2013 05:32 PM
Re: Rear end strength
 
Quote:
Originally Posted by JRL (Post 837894)
Answer: No. It won't. Best is ATV style chain drive such as Suz or Kaw 450.
Get good brakes with ATV axle assembly. OR, go with open drive desert racer drive..$$
Ratios of OEM cart final drive are all wrong too.
JR
Thanks for the reply JRL. I will be going with an RPM gearbox when I go to tackle this build...

tjb406 02-11-2013 06:05 PM
Re: Rear end strength
 
you can send me your old rear diff.:mrgreen::lhmo:

Tonka329 02-11-2013 10:15 PM
Re: Rear end strength
 
Quote:
Originally Posted by tjb406 (Post 837975)
you can send me your old rear diff.:mrgreen::lhmo:

It will be a few years but, ok:lol:

sassycat 02-11-2013 10:23 PM
Re: Rear end strength
 
Quote:
Originally Posted by Tonka329 (Post 833856)
2 weeks/100 views and no more replies??::
i no how ya feel at times..over 8,000 views on my thread and hardly anyone replys on questions,,just a few regulars:thumbup: but its all good as long as we still try to help everyone we can :wink:

crf714 02-20-2013 06:24 PM
Re: Rear end strength
 
Just put together a ZX636 EZGO with the stock rear end and it's been fine. Haven't been too hard on it on the street (pulled a couple of wheelies). Off road mostly. Don't know long term, since we are using a jack shaft with 14t and 51t sprockets, so it's turning the rear at a high RPM.


All times are GMT -5. The time now is 06:57 AM.
Page 1 of 4 1 23 > Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.