ScottyB Alltrax 500,wires,400A &202 install
Hey all,
Installing a new kit from ScottyB and I have a question or two. Moving through the install and have the new 2gauge wires with new controller (see everything above in the title). I am trying to find out why 2gauge power wire #3 is approx 4 feet long? On his diagram instructions it shows going from the B+ connection on the controller, (along with #2 which goes to the solenoid) to a connection on the reversing contactor. I have them mounted just a few inches away from each other,so I am not sure why the length of approx. 4’ ? Am I missing something or have something hooked up in the wrong place ? The wire has a band attached to it,with a #3 on it. The rest of the large wires correlate with the numbers on them,for the length that they are. Not sure how to attach pictures here,yet but will try. Also my internet is down so I am trying to do this message on my phone. |
Re: ScottyB Alltrax 500,wires,400A &202 install
This cable should be 24"
My email is cartsunlimited.net@gmail.com Contact me for a replacement cable. |
Re: ScottyB Alltrax 500,wires,400A &202 install
Ok will do Scotty
|
Re: ScottyB Alltrax 500,wires,400A &202 install
1 Attachment(s)
For my practice ,adding a photo
|
Re: ScottyB Alltrax 500,wires,400A &202 install
1 Attachment(s)
A better circle,showing the wire in question. Again, for my practice. I have it now. Lol
|
All times are GMT -5. The time now is 04:14 AM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.