ISO 3PG Parts
 

Looking for crank case and top end cover for a 3PG motor. I do not care about the internals. Please let me know if you have any of these lying around.

Thank you,
Miles

Re: ISO 3PG Parts
 

I think I may still have a whole crank case. I know I have the clutch side half, though you'll have to cut the clutch off and remove the crankshaft. Pretty sure I may have the kther half still too. PM me I'll check in the morning.

Re: ISO 3PG Parts
 

I have the complete block from an 89 if you need it. Ill have to cut the clutch off the crank to make it cheaper to ship... Its been sitting in my scrap pile because for me it wasnt worth rebuilding the motor in that cart. But its aluminum so sitting outside for a few months shouldnt hurt anything.

I have the fan cover too if you need that.

Re: ISO 3PG Parts
 

That would be great if you don’t mind!! I hate to ask but by chance do you have the cover for the top end with the robins engine tag on it? If not, I will still definitely take that side of the case. Let me know what i owe you. I’m located in La Porte, Tx 77571

Re: ISO 3PG Parts
 

Not to hijack the thread, but looking for the aluminum pulse ring that mounts on the flywheel side case. Was rebuilding my motor and just broke mine.