91 g2 secondary clutch spring
 

hi newbie here had a question on which hole i need to place the spring on the secondary clutch.new to the golf cart scene. got a g2 and the spring was sprung, so i need to get a idea as to what i need to do. thanks

Re: 91 g2 secondary clutch spring
 

search on clutch spring. I know we have posted it here on which hole to use. I even went over which hole to put the stock spring in on my build thread.

Re: 91 g2 secondary clutch spring
 

Welcome to the forum moleman8192............

Re: 91 g2 secondary clutch spring
 

Welcome to BGW!!

Now would be a good time to install a torque spring. > http://www.cartpartsplus.com/yamaha-power-kit.html

Re: 91 g2 secondary clutch spring
 

Any one know the preload in lbs we check our sleds with a small spring scale clamped to the rim on the movable sheath.

Re: 91 g2 secondary clutch spring
 

have looked havent been able to find anything looked before i posted

Re: 91 g2 secondary clutch spring
 

http://www.buggiesgonewild.com/gas-y...loud-worn.html
hope the link works, first time
Or search on author bramr1
Or, short version courtesy of smallblock450sl, but entire thread is a better education:

Don't forger to "pre load" the secondary when reinstalling. One of the spring goes into hole #3 (on the spring seat) and "B" (on the floating flange), the "turn the floating flange" till the "peaks" goes past the secondary ramp shoes and push it in. (there is a special holder tool) we use to hold it in preload till you get the plastic washer and woodruff key in place. Then the fixed sheave,washer and nut. Tighten with an impact and regrease it......Your are good to go. Hope this helps. Later Dave"

Re: 91 g2 secondary clutch spring
 

thanks alot that helps me out pretty good