Buggies Gone Wild Golf Cart Forum

Buggies Gone Wild Golf Cart Forum (https://www.buggiesgonewild.com/index.php)
-   Golf Carts and Parts (https://www.buggiesgonewild.com/forumdisplay.php?f=26)
-   -   Yamaha G1 parts for sale (https://www.buggiesgonewild.com/showthread.php?t=172874)

mikeasis 01-20-2021 07:41 PM

Yamaha G1 parts for sale
 
I pretty much have everything except stators/coils
Let me know what you need. Lots of used parts and some NOS

mikeasis 01-20-2021 07:50 PM

Re: Yamaha G1 parts for sale
 
3 Attachment(s)
New G1 floor mat and kick panel set $100 plus shipping
New engine shroud set, total is 3 pieces $100 plus shipping
New 82 J17 intake manifold and reed assembly $80 plus shipping

mikeasis 01-22-2021 06:47 PM

Re: Yamaha G1 parts for sale
 
1 Attachment(s)
Used parts for days

Texatl 02-14-2021 10:01 AM

Re: Yamaha G1 parts for sale
 
Good timing. I have a G1 I am doing a full frame up rebuild on right now... OK I need a couple of things if you have them:

front lower control arms
shocks, front or rear
any of the strut bars going to the roof
throttle Linkages from carb to... all of the junctions on mine are jacked an PO have them wrapped in zip ties. :-) so if you have that/those I'd be interested in those.

Let me know if you have any of that. I might take the upper shroud kit as well.

Thanks in advance. feel free to PM me if you want.

mikeasis 02-14-2021 10:55 AM

Re: Yamaha G1 parts for sale
 
By control arms are you talking where the shocks and knuckles mount or the front torsion bars? Are you keeping the oil injection system? If not you can reroute the throttle cable directly to the carb. If want I do have all the linkage from the exhaust flap to governor linkage and to carb. I have a set of shocks but I’d have to check if they are front or rear. I do have a roof frame but that’s going to expensive to ship

Texatl 02-14-2021 02:28 PM

Re: Yamaha G1 parts for sale
 
Yes where the shocks and knuckles Mount- NOT the torsion bar. I really just need the drivers side control arm, but if you have a pair I’d probably take both.

I am keeping the oil system and it’s working good. Please let me know about the shocks- front needed more than rear.

No worries about the top frame, I was more looking for the up portions. But I may bend up a new frame and mounts anyway.

Thanks for checking into the others stuff. ;-)

mikeasis 02-15-2021 11:46 AM

Re: Yamaha G1 parts for sale
 
3 Attachment(s)
I found some NOS linkage, oil feed line and the clamps for it along with 2 aftermarket oil filters. I got a pic of the shocks but forgot to measure

mikeasis 02-15-2021 11:50 AM

Re: Yamaha G1 parts for sale
 
I could probably find a better gov end link but I’ll have to dig. The ends are used except on the new exhaust butterfly link. I believe someone told me either Lowe’s or Ace Hardware had the plastic links’s that will work

Texatl 02-16-2021 12:29 AM

Re: Yamaha G1 parts for sale
 
I'll PM you for pricing... :-) Thx

Steelworker77 02-21-2021 02:03 PM

Re: Yamaha G1 parts for sale
 
Hoping you can help with some parts

Just bought a G1 gas cart that I believe to be a 1981.

Vin is j10-032756.

Need the following

Passenger side tie rod ends
Fuel tank vent assembly
Reed valve gaskets
Fuel pump
Brake nail catch that the e brake catches on
Pulse line to carb
Carb if you have a good one

Let me know if you can help with any of this.

Thanks!


All times are GMT -5. The time now is 08:43 PM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.