Buggies Gone Wild Golf Cart Forum

Buggies Gone Wild Golf Cart Forum (https://www.buggiesgonewild.com/index.php)
-   Electric EZGO (https://www.buggiesgonewild.com/forumdisplay.php?f=16)
-   -   alltrax controller (https://www.buggiesgonewild.com/showthread.php?t=23120)

painterman 09-12-2009 07:28 PM

alltrax controller
 
I just got my new 400 DCX controller, for my 1998 ezgo DCS cart. the controller was putting out a nummber 7 trouble code which is over voltage the voltage was 38.2. The rep. where I bought it said to try to run the cart moved maybe an inch now nothing no light green or red. Do I need to go to radio shack get a cable and try to program the controller. the supplier is closed until monday. So any help would be appreciated

roady89 09-12-2009 08:15 PM

Re: alltrax controller
 
NO, you shouldn't have to reprogram it unless someone set the voltage to low on the over voltage setting. It shouldn't be that way from the factory. If there is no light at all there may be other issues.

painterman 09-12-2009 08:28 PM

Re: alltrax controller
 
That is what the rep from the company told me, they may have set it to low, He told me to try the cart it moved a little then nothing no light on the controller, but my volt gauge on the dash stays on even with the run tow switch off

flashtime 09-15-2009 08:57 PM

Re: alltrax controller
 
My DCS does that every once in while. I'm running a DCX 400 at 48 volts. It seems to flash 7 times if I do a short charge and dont let it finish charging till it get to a float charge.


All times are GMT -5. The time now is 12:19 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. 2006-2017 Buggiesgonewild.com. All rights reserved.