2000 Club Car Solenoid suggestions
 

I have an upgraded motor and controller in my 2000 48 Volt Club Car and I believe my solenoid is bad. Any recommendations on purchasing one? Thanks in advance. :help:

Re: 2000 Club Car Solenoid suggestions
 

Contact scottyb he will make sure you test solenoid before purchase and make sure you get the part(s) you need....diode....resistor....amperage...etc he is cartsunlimited

Re: 2000 Club Car Solenoid suggestions
 

What motor and controller do you have?

Re: 2000 Club Car Solenoid suggestions
 

Let me get you the specifics on the motor and controller, I will do that tonight after work then post and let you know.

Re: 2000 Club Car Solenoid suggestions
 

IMHO I used Scotty's HD solenoid and it is a very nice one. Remember that the battery poles on the HD Solenoid are larger than a stock one.

M

Re: 2000 Club Car Solenoid suggestions
 

Does it come with mounting bracket and everything?

Re: 2000 Club Car Solenoid suggestions
 

yes, everything pictured but the 400 ANN fuse and 2 ga wire.

M

Re: 2000 Club Car Solenoid suggestions
 

I have an Admiral MOT-A1 10.0 HP, and a 500 Alltrax Amp Controller. The solenoid that is on the cart looks just like the one in the picture posted. It is so intermittently that it is very hard to trace down. The other day the solenoid was not working so we jumped it and then it worked. I wanted to test it out one more time, but its been working ever since. If you dont mind me asking how loud is that solenoid? The one on mine is very loud. Thanks for the help.:thumbup:

Re: 2000 Club Car Solenoid suggestions
 

Loud? Mine clicks and these nearly deaf veteran ears hear it just fine.

I can take an audio this weekend.

M

Re: 2000 Club Car Solenoid suggestions
 

Ok so I was able to duplicate the problem yesterday, and I noticed that when hitting the gas the controller would not light up. I did some research on Alltrax site to find them asking to reset the OBC. So I reset the OBC and everything started working again. I would like to know if anyone here knows how to delete the OBC? I do not use it for charging or a low voltage light, I have other solutions in place. Any help you all have would be greatly appreciated. :help: