cheap plasma cutter
With all cheap mig talk and with plasma cutter from some of the same makers,I got plasma cutter fever and Ta Da found the cut 50 for under $200 and ordered one today.Good reports on youtube so stay tuned.
|
Re: cheap plasma cutter
Let me know how this turns out. I want one, but wanted some real reviews.
|
Re: cheap plasma cutter
I didn't go cheap as when I decide to buy a tool, I try to buy the biggest/best I can afford and at the same time try to get something bigger than I need at the present time so I can grow into it.
I have a Longevity 110/220 plasma that will cut 3/4" and sever 1". I've tried it and it will do what they say it will. Cuts 1/4" to 1/2" like butter. But I look forward to your review of the one you ordered. |
Re: cheap plasma cutter
Sorry, double posted!
|
Re: cheap plasma cutter
I bought a collosal tech cut50d off ebay about a year ago and it works awesome for the money. I haven't tried mine with 110v yet but 220 it walks the dog. Although I didn't use the air fitting it came with, I used a set of push lock 1/4" fittings with dot air line I had from a previous project because I was reading about the leaks with the stock fittings.
|
Re: cheap plasma cutter
It looks there are MANY different names and prices for the same 50 amp 110/220 machine.I also seen the youtube video and was going to rig the air inlet with a quick fitting as you suggest.Should be here in the next couple of days.
|
Re: cheap plasma cutter
A suggestion.......... Put a good water filter on your compressor and then another on the line you connect to your plasma cutter.
Moisture can cause lots of problems with a plasma cutter. Mine has an internal water filter but I also put one on the main line coming out of my compressor and then another on my cart I have my welder and plasma cutter on. I've not had any moisture problems so far. |
Re: cheap plasma cutter
Great idea, makes plenty of sense Will do.
|
Re: cheap plasma cutter
The plasma cutter came yesterday.Ran a new 220 line today.It came with a water separator so I will use the second one at the compressor.The biggest steel I had laying around was 1/2 inch.Once I got the hang of using the cutter it cut the 1/2 like butter.For $210 delivered WOW what a machine! I think it weighs 19 lbs.The youtube cut 50 amp videos accurately show the machine and what it will do.
|
Re: cheap plasma cutter
Are replacement parts and consumables readily available?
|
All times are GMT -5. The time now is 01:56 AM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.