No acel pedal response; solenoid issue?
 

(new to this) I have a '92 EZGO marathon. Fully charged. Backed out of the man-cave with no issue, flipped to forward direction, applied accelerator. Went about six feet and died. Zero pedal response.
Batteries fully charged.
Ignition in Run.
Lever in forward direction.
Mechanicals from pedal to solenoid all in tact.
battery Cables all tight.
I can hear the solenoid click when I engage the pedal.
Looking for suggestions, experiences with this type of issue.
Thanks in advance.

Re: No acel pedal response; solenoid issue?
 

Check the throttle signal. With the ohm meter plugged into the 2 wire terminals removed from controller #2 and 3. You should read 0-5000 with the pedal stroke.