Front EZGO lights
I have front lights that look like this image.
How do you get access to the bulb? I found one screw on the front near the lens??? Do these bulbs come out from the rear of the light assembly? http://www.buggiesunlimited.com/imag...ucts/31482.jpg Sent from my Nexus 6 using Tapatalk |
Sorry that image link did not work...
Here is the link... http://www.buggiesunlimited.com/imag...ucts/31482.jpg Sent from my Nexus 6 using Tapatalk |
Re: Front EZGO lights
Those bulbs are accesable , 1 of 2 ways,depending on the year .
ome, there are 2 screws on the sides of the assembly, that unscrew from the front. The other, you need to remove the entire black housing ( 4 screws), and pull the entire unit out. Then you should see 2 small metal pieces on two corners of the rear, holding it together. |
I only see one screw on the front of the light assembly besides the 4 screws attaching it to the cart body. Would that allow it to come out from the front?
I was hoping not to have to take the assembly off. The lights assembly is not using a wire harness to unplug and there is not alot of extra wire. Sent from my Nexus 6 using Tapatalk |
All times are GMT -5. The time now is 05:51 AM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.