Buggies Gone Wild Golf Cart Forum

Buggies Gone Wild Golf Cart Forum (https://www.buggiesgonewild.com/index.php)
-   On Road Golf Carts! (https://www.buggiesgonewild.com/forumdisplay.php?f=39)
-   -   2014 Precedent (https://www.buggiesgonewild.com/showthread.php?t=149786)

hammerzin 01-29-2019 09:16 PM

2014 Precedent
 
I' trying to figure this 2014 precedent out here is what components on the car

White 1515 controller New
heavy duty solenoid New
top hat speed sensor New
brand new battery's New
no on board computer
Eric charger New

And i have 50 volts going to controller but hit the peddle and nothing not solenoid clicking put it in reverse got buzzer but no9 peddle response
The solenoid has voltage on both sides of the small terminals al the time is this right
Need help thanks
Scott:help:

hammerzin 01-29-2019 09:18 PM

Re: 2014 Precedent
 
One more thing the car was running in limp mode and my buddy touched something and fried my old controller but has not moved since i've replaced it

gotti 01-30-2019 08:00 AM

Re: 2014 Precedent
 
Quote:

Originally Posted by hammerzin (Post 1582892)
One more thing the car was running in limp mode and my buddy touched something and fried my old controller but has not moved since i've replaced it

I'm not familiar with this cart but have you checked to make sure all wires are good and have good connection? Since your buddy fried your old computer, there may be some burnt wires somewhere that aren't allowing for proper electrical flow or a loose or bad ground. Also, does this model have fuses that might have blown when the computer fried?

hammerzin 01-31-2019 01:16 AM

Re: 2014 Precedent
 
I've ohm all wires and the check out , I also need to confirm where the charge port wire should be going to

BBBHC 01-31-2019 06:35 AM

Re: 2014 Precedent
 
Here is a "Sticky" thread on wiring diagrams for Club Cars, that might help you out: http://www.buggiesgonewild.com/elect...-diagrams.html

Post #22 has 4 pdf's on 2014 Precedents

CoiloverCarts 02-23-2019 02:23 AM

Re: 2014 Precedent
 
Where were the wires that your buddy touched to fry the controller? If behind the dash check the sonic weld.

https://uploads.tapatalk-cdn.com/201...fe1bae986a.jpghttps://uploads.tapatalk-cdn.com/201...62d8c006bb.jpg

Sent from my SM-N960U using Tapatalk


All times are GMT -5. The time now is 02:08 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.