Controller
1 Attachment(s)
Is this pin #6 suppose to have a wire connected to it? The one circled in red?
It has a pin in it but no wire. #5 has no pin are wire and it's not suppose to. I can't remember if 6 is though.:help: |
Re: Controller
Nope. Always been 5 wires in a 6 pin plug.
Maybe it was for future use that never came? |
Re: Controller
1 Attachment(s)
Quote:
|
Re: Controller
JohnnieB I'm new to this I have a 99 ezgo txt 36v have voltage out of solenoid when I push the pedal have voltage at the a1 a2 cables on the motor when I push the pedal but the cart wont move...the solenoid just clicks
|
Re: Controller
Quote:
|
Re: Controller
Quote:
1. power (+) 2. reduced reverse 3. 4. throttle out and in |
Re: Controller
Thanks guy's the picture had me confused and second guessing myself! Thanks.:thumbup:
|
Re: Controller
2 Attachment(s)
The controller was the one in this picture. I took and cut all the bad spots in the wiring and replaced the 3 motor cables to the F/R with old stock ones I had. Installed a old rebuilt F/R board and cam with 2 new micro switches. The cart will run in reverse only so I guess the forward in the controller is gone and I assume that is what lead to the melt down of the F/R cam.
I spent several hrs cutting and replacing wires. I was hoping to have it running today but, Oh well I guess I did meet my goal because it will run in reverse! :shock: |
All times are GMT -5. The time now is 01:21 AM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.