No reverse buzzer
 

Got a '98 48 volt DS. I want to do away with the annoying reverse buzzer. Can't slip away from the dogs without them going crazy. I unplugged it and no buzzer, no reverse either. Can I just put the wires together with a butt connector, or will that cause a problem? Any way to easily wire a small light to come on on the dash in place of the buzzer? Don't want the kids to forget it's in reverse and plow into something.

Re: No reverse buzzer
 

you can put a little tape on it to mute it
a 48v light in the dash will work

48V 3W Amber Turn Signal Bulb
https://electricscooterparts.com/images/BLB-123T.jpg

WESTINGHOUSE PILOT LIGHT PB1HAL6, GREEN, 48 VOLTS, 6 WATTS
https://i.ebayimg.com/thumbs/images/...hDK/s-l225.jpg

Re: No reverse buzzer
 

Didn't know thay made a 48 volt bulb. That's what I need. Would it me alright to cut the buzzer out completely (jus wire the 2 wires together? I guess the hot from the light could be crimped in the butt connector also. Then should it be grounded to the - on the battery pack?

Re: No reverse buzzer
 

there is a pos and neg
red pos
orange neg
just wire in a light to the buzzer


https://s26.postimg.org/4u2noinc9/98_keysw.png

if you want to get fancy wire in a dptp switch
so you can change from light to buzzer

http://www.allelectronics.com/mas_as...0x480-6119.Jpg


https://s26.postimg.org/4wmjbcqzt/on...n_switch_2.png

Re: No reverse buzzer
 

...in his case a dual ON-ON (no central off position as on the picture), except to block the reverse... :wink:

Re: No reverse buzzer
 

I don't get fancy with electrical. Sometimes I don't even get by. Thanks fellas for the help

Re: No reverse buzzer
 

yep that will work :thumbup:

https://s26.postimg.org/4xwh4rstl/rocker_sw_on_on.png