Buggies Gone Wild Golf Cart Forum

Buggies Gone Wild Golf Cart Forum (https://www.buggiesgonewild.com/index.php)
-   Electric Club Car (https://www.buggiesgonewild.com/forumdisplay.php?f=13)
-   -   Motor connection question, 1984 Club Car (https://www.buggiesgonewild.com/showthread.php?t=59309)

trooper7 01-20-2012 08:09 PM

Motor connection question, 1984 Club Car
 
1 Attachment(s)
I'm a newbie here, but I have searched the web and this forum
and can't find the info I need. I cannot figure out which connections
on the motor are A1, A2, S1, and S2. I can't see markings on the motor
either. Please help! I am installing a new electronic controller
(Alltrax 4844 with an Albright SW180 solenoid, and PB-6 pot).
Attached is a picture of the motor , it is a Baldor 36v, 2 HP, Spec.: 45-29w02,
and frame 6607 4527D.

Meat Man 01-20-2012 08:28 PM

Re: Motor connection question, 1984 Club Car
 
Did you check the wiring iarams in the stickies above ?

trooper7 01-20-2012 08:31 PM

Re: Motor connection question, 1984 Club Car
 
Yes, I did.

shadowman 01-21-2012 09:33 AM

Re: Motor connection question, 1984 Club Car
 
if you look at a diagram in the stickies follow the cable color of cables and read what stud they are hooked to and then on yours follow the color and it should be the same.....like in the stickies if red is going to s-1 and white to a-1 then yours should be the same as per cable....follow me?? ..............................8)

93-306 01-21-2012 09:44 AM

Re: Motor connection question, 1984 Club Car
 
I have the same problem on mine. No markings what so ever or wires to follow

Stevegrmich 01-21-2012 09:51 AM

Re: Motor connection question, 1984 Club Car
 
There must be some sort of "standard" for the motor connections, ie, f/r switch always goes to same motor connections, whether it is A1 or S1, etc . . . battery terminal always goes to same motor connection, etc . . . ??

scottyb 01-21-2012 09:56 AM

Re: Motor connection question, 1984 Club Car
 
Most all of these motors have the terminal markings stamped into the housing. They can be hard to find on dirty old motors....

shadowman 01-21-2012 10:01 AM

Re: Motor connection question, 1984 Club Car
 
Quote:

Originally Posted by Stevegrmich (Post 678077)
There must be some sort of "standard" for the motor connections, ie, f/r switch always goes to same motor connections, whether it is A1 or S1, etc . . . battery terminal always goes to same motor connection, etc . . . ??

scotty thats what i trying to say if a diagram shows what cable and or color.....than his motor should be the same like red cable here and white cable here..................................8)

trooper7 01-21-2012 02:27 PM

Re: Motor connection question, 1984 Club Car
 
1 Attachment(s)
I found this picture in a Club Car user manual. This seems to have the answer, if I can trust it.
Red: S1
White:A2
Black: S2
Black: A1
Does that make sense?

shadowman 01-21-2012 02:28 PM

Re: Motor connection question, 1984 Club Car
 
yes they should be standard even if they arn,t located the same way.......................8)


All times are GMT -5. The time now is 09:56 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.