headlight bar
I ordered a headlight bar from ebay and I was wondering if anyone knows were I can get the wires and mounting brackets I have the headlight bar and bulbs for it but need the rest:thumbup:
|
Re: headlight bar
Is it the standard bar that mounts under the cowl? It has the single lens all the way across? If not, a picture might help.
|
Re: headlight bar
If it's just the headlight bar, it only takes 2 wires, 1 to 12v neg and 1 to the switch to fuse to 12v pos. If you have signals, tails and brakes lights that a whole different story. You should be able to fab up some brackets pretty easily.
Here's a complete generic light harness from one of our sponsors: http://www.everythingcarts.com/p-777...e-harness.aspx |
Re: headlight bar
|
Re: headlight bar
Call a sponsor and ask how much the stock light bar bracket and wiring harness is.(as above):thumbup: The stock ezgo harness will probably cost a bit more than aftermarket kits. The light bar is normally mounted at the same points your front bumper is. Wouldn't take too much work to make brackets
Some EZ GO's come with a 3 pole ignition switch (key) The 3rd pole is for the light kit. I like that feature and have it on mine.... Good Luck |
Re: headlight bar
how do I know if mine has that
|
Re: headlight bar
Quote:
|
Re: headlight bar
Sent you a PM with wiring diagram info.
|
Re: headlight bar
Quote:
I think I fell asleep on ya'll last night.:oops: It was a long day :thumbup::mrgreen: |
Re: headlight bar
Thanks for all the help one of our site sponsers said they can send me the mounting brackets for 25 dollars :mrgreen:
|
All times are GMT -5. The time now is 11:42 PM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.