Buggies Gone Wild Golf Cart Forum
Page 1 of 4 1 23 > Last »
Show 40 post(s) from this thread on one page

Buggies Gone Wild Golf Cart Forum (https://www.buggiesgonewild.com/index.php)
-   Electric Club Car (https://www.buggiesgonewild.com/forumdisplay.php?f=13)
-   -   How to make New Battery cables for club cars (https://www.buggiesgonewild.com/showthread.php?t=52296)

ForBruce 08-02-2011 05:49 PM
How to make New Battery cables for club cars
 
http://www.buggiesgonewild.com/elect...ry-cables.html

gaminde 08-02-2011 09:26 PM
Re: How to make New Battery cables for club cars
 
I just made my own with #2 welding cable, I already had large lug crimps 3' long it squeezes the hell out of the crimps.

ForBruce 08-03-2011 05:49 AM
Re: How to make New Battery cables for club cars
 
yea but............. open one of those battery crimps when it's 4 months old and seperatethe strands of wire that were at the crimp point....

you wil note a large degree of oxidation at the point and angle where each
wire meets the other.....

scottyb 08-03-2011 07:48 AM
Re: How to make New Battery cables for club cars
 
1 Attachment(s)
:lhmo:
click here

sonicj 08-03-2011 09:53 AM
Re: How to make New Battery cables for club cars
 
2 Attachment(s)
Quote:
Originally Posted by ForBruce (Post 602180)
yea but............. open one of those battery crimps when it's 4 months old and seperatethe strands of wire that were at the crimp point....

you wil note a large degree of oxidation at the point and angle where each
wire meets the other.....
no-ox-id a special + adhesive lined heat shrink = problem solved

ForBruce 08-03-2011 03:03 PM
Re: How to make New Battery cables for club cars
 
Holy Sh-t..................my cables are better than your cables............my daddy is bigger than yours .....and when i worked for NASA
we glued the wires...........GEE


SCOTTY----GET ME THAT DEAD HORSE---MY TURN

ForBruce 08-03-2011 03:06 PM
Re: How to make New Battery cables for club cars
 
AND AS FOR YOU ---SONICJ



as tight as you can seal with heat shrink.....fumes of H2So4..... Hydrogen sulfide..... seem to penetrate

oh---and yes one more thing..my world is not perfect....how do i climb into yours ???

ok---i pass to scotty now

gaminde 08-03-2011 03:31 PM
Re: How to make New Battery cables for club cars
 
Quote:
Originally Posted by ForBruce (Post 601979)

Bruce
I was on my phone this did not come across as a link, I thought you were just asking a question. Now on my computer it shows as a link guess you could be correct although its not really a sealed container (battery compartment). shall we say 6 of one 1/2 dozen of the other. Ill probably redo them before they go bad anyway.

gaminde 08-03-2011 03:33 PM
Re: How to make New Battery cables for club cars
 
Quote:
Originally Posted by ForBruce (Post 602180)
yea but............. open one of those battery crimps when it's 4 months old and seperatethe strands of wire that were at the crimp point....

you wil note a large degree of oxidation at the point and angle where each
wire meets the other.....
I made them xtra long so in 4 months from today you remind me I will cut the end off and test it.

ForBruce 08-03-2011 03:38 PM
Re: How to make New Battery cables for club cars
 
.....CRIMPING TOOL INFO


i was trying all different way to crimp the connectors when by accident and frustrated i tried a SMALL tool i have used for 20 years making small size wire connector crimps...

GUESS WHAT...it works great for #4 copper battery terminal crimps and it not expensive

this is the chiepest i have seen it for

http://www.mytoolstore.com/ideal/ide12-06.html


All times are GMT -5. The time now is 12:08 PM.
Page 1 of 4 1 23 > Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.