Turn Signals
 

Can someone please tell me what's involved in adding front turn signals to my DS model Club Car? It has "factory" headlights & taillights, plus brake lights, so rear signal lights are there; but as far as I can tell, only amber reflectors in the front light assemblies.

I've seen several different turn signal switch kits, but no mention of the lights themselves.

Re: Turn Signals
 

If you bought a turn signal switch kit, seems as though you could replace the
reflectors with small amber lights from an auto parts store. I have never done
it but I think it would work.

Re: Turn Signals
 

Usually..... Usually...... behind the amber reflectors is a black rubber plug that is removeable. Twist the plug to the left one quarter turn and pull the plug out. You will probably find this plug is actually a replica of an actual "push-in" lamp socket.

Also instead of being an amber reflector you will probably find this to be an actual lense and socket assembly for your turn signals lamps. You may need to purchase the lamp sockets (complete with pig-tail wires) at any auto parts store with the bulbs.

Wire them accordingly with the turn signals wiring loom and Wah-Lah. Front turn signals now.

Re: Turn Signals
 

Rusty, you were zackly right - dummy light socket plugs. Should be a piece-o-cake to convert 'em.

Thanks!