1995 ez go series won't move
 

WE HAVE A 1995 EZ GO 36 VOLT CAR THAT WON'T RUN.

PUT ON A NEW CONTROLLER, F & R ASSEMBLY, TESTED THE THROTTLE POSITION SENSOR, DISCHARGED BATTERY PACK WHICH IS OKAY AND STILL NOT RUNNING. NEED HELP.

THANKS,

ROY:help:

Re: 1995 ez go series won't move
 

Does the solenoid click when you press the pedal?

Re: 1995 ez go series won't move
 

yes:help:

Re: 1995 ez go series won't move
 

Make sure battery + voltage is getting through the big terminals on the solenoid when the pedal is depressed. Secure the cart from sudden unexpected movement while probing around. Others here are more help than me but they will want this information to help you troubleshoot. Why did you replace all these parts? Was the cart not running before?

Re: 1995 ez go series won't move
 

THANKS. CUSTOMER SAID HE CHANGED OUT SOLENOID. NO READING OFF SOLENOID TEST. WILL INSTALL NEW SOLENOID.

HIS CONTROLLER WAS BAD SO WE REPLACED IT AND THE F&R SWITHCH WAS NOT MAKING CONTACT.

WE WILL LET YOU KNOW WHEN WE GET THE NEW SOLENOID ON.

THANKS AGAIN,

ROY:help:

Re: 1995 ez go series won't move
 

Did both sides of solenoid big terminals have no voltage or just the output side? Is there a resistor across the big terminals and if so when the pedal is pressed what voltage appears on both sides. If the solenoid is new and properly installed another one may not fix problem.

Re: 1995 ez go series won't move
 

new solenoid did not help. jumped motor and will run in forward and arched in reverse.

do you think the motor is the issue?

thanks,

roy

Re: 1995 ez go series won't move
 

You are not answering my questions about the solenoid voltage across the large terminals. We need more information. You need to get someone else to help you. JohnnieB comes highly recommended.

Re: 1995 ez go series won't move
 

No voltage on either side of the solenoid.
Sorry i did not answer your questions earlier.

What do you think?

Thanks,

roy

Re: 1995 ez go series won't move
 

solenoid test
[/quote]