Voltage reducer 2018 elite
I'm planning a bazooka tube install into my cart. I believe the two boot covered connections are the 12v and ground connections from the voltage reducer, but since the wires go into and out of the wiring harness, and I don't have a schematic, I'm not positive. Could someone verify my assumption for me? Also, does anyone have a schematic for this cart?
Thankshttps://uploads.tapatalk-cdn.com/201...bd91a745d1.jpg Sent from my SM-N950U using Tapatalk |
Re: Voltage reducer 2018 elite
It is 12v across the terminals, so it must be. I guess there is no other 12v source other than the reducer. Sorry first cart and I'm just thinking through it.
Still, if anyone has a schematic, that would be helpful. Sent from my SM-N950U using Tapatalk |
Re: Voltage reducer 2018 elite
Those are indeed the 12v from the reducer. It is only rated for 20a if I recall, not gonna do much for an amp.
|
Re: Voltage reducer 2018 elite
The amp only has a 15 amp fuse and even then, I won't get near that.
Thanks Sent from my SM-N950U using Tapatalk |
All times are GMT -5. The time now is 06:12 PM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.