Powerdrive 3 is not cutting off
I've tried this charger on multiple carts and it never fully cuts off. It DOES decrease amperage output over time but the lowest is 5 amps and it never cuts off even after 12+ hours of charging on known GOOD batteries in more than 3 different carts. Any suggestions? I thought these got feedback from the OBC and didn't have any "smart" components telling it when to cut off or on? :help::help:
|
Re: Powerdrive 3 is not cutting off
Most likely the relay inside the charger is "sticking" and not releasing the contacts when the OBC removes power from the relay coil.
|
Re: Powerdrive 3 is not cutting off
gotcha I got some on order so I'll try that when they come in. Thanks Sergio!
|
Re: Powerdrive 3 is not cutting off
I agree with Sergio. It's either a bad relay or someone has bypassed the relay internally in the past. May want to check that out.
|
All times are GMT -5. The time now is 07:59 PM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.